Why go Modular?
Cost
Speed
Speed
With the rising cost of inflation, the most cost-effective way to live is to buy modular hands down. Modular homes are built from $78-$125 dollars per square foot.
Speed
Speed
Speed
The fastest way to receive a turnkey home within months would be to buy a modular home.
Value
Speed
Value
The best value for the dollar with surpassingly good resale values are modular homes.
COLT & SKYLINE MODULAR HOME
Welcome to The Colt Firm Business and Management Consulting
Colt & Skyline offers a wide range of factory-built homes, BOTH manufactured homes and modular homes.
What's the difference?
Both manufactured and modular homes look like any other conventionally built home in appearance and both are built to codes that ensure a safe and sound investment. Here are the key differences.
Manufactured homes are built as either a single section home or a multi-section home, depending on the floor plan. They are constructed and delivered on a permanent chassis, so a permanent foundation is not necessary. Because of their efficient, high-quality construction, these homes provide the best value in home buying. Manufactured homes conform to Housing and Urban Development (HUD) codes. During your search, you’ll often find them referred to as "HUDs." Prior to the Federal Manufactured Home Construction Safety Standards, manufactured homes were sometimes called "mobile homes" or "trailer homes." The HUD code regulates the design, construction, structural durability, transportability, fire resistance and energy efficiency of a home. It also prescribes performance standards for the mechanical, plumbing and electrical standards.
Modular homes, while built in the factory and transported in sections, are virtually indistinguishable from a site-built home, though they tend to be better constructed, take less time to build and are more energy-efficient. They are placed on a foundation and are subject to the same codes as any other site-built home, including all local, state and regional building regulations.
While manufactured homes are one-story designs, a modular home can be of any size.
After your Skyline home is built, it will be delivered to location, complete with appliances and all other components that make a home ready for you to occupy. Because of the efficiencies gained by simultaneous site work and construction and because we build under ideal, controlled conditions, the time between purchase and closing is dramatically reduced. Your home will be completed sooner and built better.
Both manufactured and modular homes are inspected frequently at the assembly plant during each phase of construction. In-plant inspectors as well as independent agencies inspect your home on behalf of federal, state and local governments for code compliance. Evidence of this inspection is normally the application of a federal, state or inspection agency label of approval.
FACTORY-BUILT
As you begin to look into factory-built homes, you’ll hear many terms and descriptions that might be difficult to sort through. At Skyline, we create a wide range of factory-built homes, including manufactured homes and modular homes. What does all that mean?
Factory-Built vs. Site-Built Homes
While these terms are easy to figure out, there are differences that are not immediately apparent. Yes, a factory-built home is just that…a home that is fully constructed in a factory. After the framework construction, the interior finish, countertops and cabinetry, carpet and another final finish work is completed. Factory-built homes are transported to the site and quickly assembled, ensuring minimal weather exposure. Once the sections of the house are assembled, utilities are connected and a short list of interior finish work is completed. The site will have been prepared while the home was being constructed.
A site-built home is one where all the components, right down to the lumber and fasteners are brought to the outdoor location and assembled outdoors, piece-by-piece, and exposed to the weather during most of the process.
We believe there are distinct advantages to the factory-built model.
- All assembly is done under climate-controlled conditions. None of the building materials are exposed to the weather before or during construction. Before building materials are used, they are also stored indoors. In the construction of site-built homes, materials are exposed when stored on-site before use, and during most of the construction process until the home is fully sealed. Exposure to outdoor conditions, especially rain and moisture can cause increased expansion, contraction and warping and can increase the potential of mold problems.
- Factory-built homes are generally stronger. They’re constructed to withstand transportation, and as a result, are sturdier once they’re on site.
- Factory construction is more efficient. Site work and construction of your home can happen at the same time. And because all materials are on hand, there are no delays in material delivery. And weather-related delays are virtually non-existent. On average, you’ll be able to move in to your factory-built home in far less time than conventional construction.
